Options for Replacing your Bimini Top
Please note that in most cases, one manufacturers fabric WILL NOT FIT properly (if at all) onto another manufacturers frame.
The reason they do not fit is that each manufacturer places the various bends in their metal bows at different locations and often the radius or angle of the bend itself may vary. Also, on some tops, the location where the bows attach to the top are different, preventing the "balanced" tensioning of the fabric.
Our top (the fabric part) will fit your frame if your existing top was made by Carver Industries out of Landrum South Carolina. If it was, we would need to know when the original top was purchased as they have changed their design a few years ago.
To see which brand of top you have, look for a decal on the underside of the top (Normally it's centered on the back).
Your Options
Select By Brand of Boat
You can purchase a complete new kit (fabric & frame with all new mounting hardware) selected by the Make / Model / Year of your Boat HERE. (These tops have Round Tubing)
Select By Size
Round Tubing: You can purchase a complete new kit (fabric & frame with all new mounting hardware) selected by comparing the Size of your Old Top of your Boat HERE. (These tops have Round Tubing)
Select Square Tube Biminis
Square Tubing: You can purchase a complete new kit (fabric & frame with all new mounting hardware) selected by the Size of your Old Top of your Boat HERE. (These tops have 1" Square Tubing and are typically used on Patio / Pontoon Boats.)
Select Square Tube Fabric Replacements (limited sizes)
You can purchase a NEW Replacement Fabric for an existing Patio / Pontoon / Deck Boat if you have an existing Square Tubing of your Boat HERE. Important: If using option #4, be absolutely sure that your existing frame matches the measurements specified.
Copy Cover Program
If you still have the original fabric (even if it's torn up) we can copy your Bimini Top with 10 Year Sunbrella Fabric through our Copycover program as described at: Copycovers.com. There is sample pricing for that program HERE. This service is available for round or square tube bimini tops.
AGAIN, Please note that in most cases, one manufacturers fabric WILL NOT properly (if at all) onto another manufacturers frame.
The reason they do not fit is that each manufacturer places the various bends in their metal bows at different locations and often the radius or angle of the bend itself may vary. On some tops, the location where the bows attach to the top are different, preventing the "balanced" tensioning of the fabric.
Our top (the fabric part) will fit your frame if your existing top was made by Carver Industries out of Landrum South Carolina. If it was, we would need to know when the original top was purchased as they have changed their design a few years ago.
To see which brand of top you have, look for a decal on the underside of the top (Normally it's centered on the back).
If your boat manufacturer is available for questions, and your top is a factory model, ask them who they contracted out the sewing to that particular year. If the sewing plant can be located, there's a chance they may still have the pattern.
Feel free to give us a call with any questions you might have.
800-982-6966
