Ameri-Shield
Protect aging liner walls with our Ameri-Shield overlay that locks into your bead track and shields the sun-exposed waterline.
Pool Liner Installation
Repair Kit Instructions
To repair a hole, cut a piece of vinyl patch material at least 1 inch larger than the hole on all sides and round the corners.
Clean the area so the liner is smooth, then apply an even coat of glue to both the patch and liner using the brush attached to the underside of the glue can lid.
Wait 3 to 5 minutes until the glue on the patch is tacky, position the patch over the hole, and hold it in place for a couple of minutes. If the hole is under water, wear goggles or use a pole to hold the patch in place. The glue can includes more detailed instructions if needed.
Blue Vinyl Repair Kits
Three ready-to-ship vinyl repair kits sized for quick patch jobs.
20 mil light blue patch material and printed instructions included in every kit.
-
Small Kit - $63.55/ea:
- 1ft x 10ft of 20 mil. light blue patch material
- One quart can of HH66 Adhesive
-
Medium Kit - $112.10/ea:
- 1ft x 20ft of 20 mil. light blue patch material
- Two quarts of HH66 Adhesive
-
Large Kit - $152.77/ea:
- 1ft x 30ft of 20 mil. light blue patch material
- Three quarts of HH66 Adhesive
Light blue patch material bonds in minutes on above ground or inground liners.
We do not ship these products to Canada.