Simple Strip Door Installation
1. Mount The Hardware
Install mounting bar(s) either on the wall above the door or on the underside of the door lintel. (Time here is based on the hardware installation of a typical 8'0" Wide 10'0" High doorway opening)
2. Attach The Strips
Place the PVC strips on the Save-T Loc hardware that was just installed. Refer to the detailed instructions that came your strip door for proper overlap configurartion. (Time is based on a typical 8'0" Wide 10'0" High doorway opening for 12" PVC strips using a 67% overlap)
3. Place Retainer Bars
Place locking retainer bars over the slotted mounting pins and lock the strips in place. (Again, time is based on a typical 8'0" Wide 10'0" High doorway opening)
